Machine Tools Production Systems 3 (eBook)

Mechatronic Systems, Control and Automation
Artikelnummer: 978-3-658-34622-5
Einband: PDF
Verfügbarkeit: Download, sofort verfügbar (Link per E-Mail)
CHF 153.50
decrease increase

The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants.

The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.


Prof. Christian Brecher was elected as university professor for the Chair of Machine Tools at the Laboratory for Machine Tools and Production Engineering (WZL) of the RWTH Aachen University in 2004. He is also a member of the board of directors of the Laboratory for Machine Tools and Production Engineering (WZL) and of the Fraunhofer Institute for Production Technology (IPT), Aachen. He focuses on machine, transmission and control technology. Since 2012, as a co-founding member together with Prof. Hopmann, Prof. Brecher is head of the Aachen Center for Integrative Lightweight Production (AZL) of the RWTH Aachen University. Since 2018, Prof. Brecher has been head of the Fraunhofer Institute for Production Technology (IPT). Since 2019, he has been the spokesperson for the "Internet of Production" Cluster of Excellence at the RWTH Aachen University.

Prof. em. Dr.-Ing. Dr.-Ing. E. h. Dr.-Ing. E.h. Manfred Weck was head of the Chair of Machine Tools at the Laboratory for Machine Tools and Production Engineering (WZL) of the RWTH Aachen University from 1973 to 2004. Since its foundation in 1980 until 2004, he was also Director and Head of the Department for Production Machines of the Fraunhofer Institute for Production Technology (IPT), Aachen. He founded the AiF Research Community "Ultrapräzisionstechnik e.V." (Ultraprecision technology) in 1988. Over the years, Prof. Weck received various honors and awards, amongst them the SME Frederick W. Taylor Research Medal in 2007 and the Acceptance into the Hall of Fame of the Manager Magazine in 2015. Furthermore, Prof. Weck received the Aachen Engineering Prize in 2017, honoring him for his life's work.










The first part of this third volume focuses on the design of mechatronic components, in particular the feed drives of machine tools used to generate highly dynamic drive movements. Engineering guides for the selection and design of important machine components, the control technology of feed drives, and the measuring systems required for position capture are presented. Another focus is on process and diagnostic equipment for manufacturing machines and systems. The second part describes control concepts including programming methods for various applications of modern production systems. Programmable logic controllers (PLC), numerical controllers (NC) and robot controllers (RC) are part of these presentations. In the context of automated manufacturing systems, the various levels of the automation pyramid and the importance of control systems are also outlined. Finally, the volume deals with the engineering of machines and plants.

The German Machine Tools and Production Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with colored technical illustrations throughout. This first English edition is a translation of the German ninth edition.


Prof. Christian Brecher was elected as university professor for the Chair of Machine Tools at the Laboratory for Machine Tools and Production Engineering (WZL) of the RWTH Aachen University in 2004. He is also a member of the board of directors of the Laboratory for Machine Tools and Production Engineering (WZL) and of the Fraunhofer Institute for Production Technology (IPT), Aachen. He focuses on machine, transmission and control technology. Since 2012, as a co-founding member together with Prof. Hopmann, Prof. Brecher is head of the Aachen Center for Integrative Lightweight Production (AZL) of the RWTH Aachen University. Since 2018, Prof. Brecher has been head of the Fraunhofer Institute for Production Technology (IPT). Since 2019, he has been the spokesperson for the "Internet of Production" Cluster of Excellence at the RWTH Aachen University.

Prof. em. Dr.-Ing. Dr.-Ing. E. h. Dr.-Ing. E.h. Manfred Weck was head of the Chair of Machine Tools at the Laboratory for Machine Tools and Production Engineering (WZL) of the RWTH Aachen University from 1973 to 2004. Since its foundation in 1980 until 2004, he was also Director and Head of the Department for Production Machines of the Fraunhofer Institute for Production Technology (IPT), Aachen. He founded the AiF Research Community "Ultrapräzisionstechnik e.V." (Ultraprecision technology) in 1988. Over the years, Prof. Weck received various honors and awards, amongst them the SME Frederick W. Taylor Research Medal in 2007 and the Acceptance into the Hall of Fame of the Manager Magazine in 2015. Furthermore, Prof. Weck received the Aachen Engineering Prize in 2017, honoring him for his life's work.










Schreiben Sie Ihre eigene Bewertung
  • Nur registrierte Benutzer können Produkte bewerten
*
*
Schlecht
Sehr gut
*
*
*
*
VerlagSpringer Fachmedien Wiesbaden
EinbandPDF
Erscheinungsjahr2021
Seitenangabe697 S.
AusgabekennzeichenEnglisch
AbbildungenXXII, 697 p. 750 illus., 742 illus. in color.
Masse56'084 KB
PlattformPDF
ReiheLecture Notes in Production Engineering; Engineering; Engineering
AutorBrecher, Christian / Weck, Manfred

Alle Bände der Reihe "Lecture Notes in Production Engineering; Engineering; Engineering (R0)"

Über den Autor Christian Brecher

Prof. Dr.-Ing. Christian Brecher was appointed University Professor for the subject Machine Tools at the Machine Tool Laboratory WZL of RWTH Aachen University and member of the Board of Directors of WZL and IPT (Fraunhofer Institute for Production Technology) in January 2004. His main areas of expertise include machine, gearbox and control technology. Since 2012, he has also headed the Aachen Center for Integrative Lightweight Design AZL at RWTH Aachen University as a founding member together with Prof. Hopmann. Furthermore, in 2018, he became the Institute Director of the Fraunhofer Institute for Production Technology IPT.Prof. em. Dr.-Ing. Dr.-Ing. E. h. Dr.-Ing. E. h. Manfred Weck held the Chair of Machine Tools at the Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen University from 1973 to 2004 and was Director and Head of the Division Production Machines of the Fraunhofer Institute for Production Technology IPT, Aachen, fromits foundation in 1980 until 2004, as well as founder of the AiF Research Association "Ultra-Precision Technology e.V." Over the years, he has received numerous honors and awards including the SME Frederick W. Taylor Research Medal in 2007 and induction into Manager Magazine's Hall of Fame in 2015. Prof. Weck is the recipient of the Aachen Engineering Award, honoring him for his life's achievements in 2017.

Weitere Titel von Christian Brecher

Produktbewertungen
Nur registrierte Benutzer können Produkte bewerten